Advanced Settings; Wi-Fi Protected Setup - Brickcom WFB-100A User Manual

Advanced Settings

Network Mode - From this drop-down menu, you can select the wireless standards
running on your network. If you have both Wireless-B, Wireless-G and Wireless-N
(2.4GHz) devices in your network, keep the default setting, Mixed. If you have both
Wireless-B, Wireless-G devices in your network, select BG-Mixed. If you have only
Wireless-B devices, select Wireless-B Only. If you have only Wireless-G devices, select
Wireless-G Only. If you have only Wireless-N (2.4GHz) devices, select Wireless-N Only.
Radio Band - The settings are available for the Auto-20/40MHz channel and Standard-20
MHz channel. The Auto-20/40MHz channel set up a network using the 20/40MHz band,
and the Standard-20 MHz channel set up a network using the 20 MHz band.
Enable WMM (802.1e QoS) - WMM is a wireless Quality of Service feature that improves
quality for audio, video, and voice applications by prioritizing wireless traffic. To use this
feature, your wireless client devices in your network must support Wireless WMM. If you
would like to disable this feature, select Disabled. Otherwise, keep the default, Enabled.

Wi-Fi Protected Setup

Use this method if your client device has a Wi-Fi Protected Setup PIN number.
1. Enter the PIN number and SSID from the device in the field on the screen.
Click Apply or Reset to take effect.
41