Event; Motion Detection - Brickcom WFB-100A User Manual

Event

Motion Detection

Motion can be detected by measuring change in speed or vector of an object or objects in
the field of view. This section explains how to configure the Network Camera to enable
motion detection. There are three motion detection windows can be configured.
Detection Setting - Select and enable the motion detection windows function. Easier
to trigger event by higher the sensitivity value and lower the Threshold value.
Notification - To react in response to particular events. A typical application is that when
a motion is detected, the Network Camera sends buffered images to a FTP server,
Samba, SMTP or HTTP as notifications. In this page, you can specify which notification
messages will be sent when a trigger is activated. You can configure the Network Camera
to send video streaming URL or video clips to your email address or FTP site.
Click Apply or Reset to take effect.
43