Brickcom WFB-100A User Manual page 36

Night Vision
IR CUT - the Network Camera switches off the IR cut filter at all times for the sensor to
accept the infrared light, thus helps improve low light sensitivity.
Auto - The Network Camera automatically removes the filter by judging the level of
ambient light.
Shutter Speed – Only effects in low lighting conditions
Motion – enable this function to have normal motion image, but slight blur.
Low Noise – enable this function to have sharper image, but slight tardy motion.
Environment - User can look for a place that best suits your needs, either outdoor or
indoor.
Flicker-Free - While flicker-free technology eliminates the problem of flicker, it can cause
slight judder on fast moving images or blurring problems; fast scrolling text for example
may blur.
NOTE - The "Environment" setting adjusts the sampling rate of the camera sensor to
achieve Flicker-free effect on the video.
The sampling rate, however, may not work best with the frame rate chosen in the "Video"
setting.
For best recording experience, configure your IP camera to one of the following frame
rates based on the Environment used:
Environment / Flicker-Free
------------------------------------
Outdoor
Indoor (50/60 Hz )
Frame Rate
----------------------------------
25, 10, 7, 5, 3, 2
20, 10, 7, 5, 3, 2
28