Brickcom WFB-100A User Manual page 55

HTTP - Select to send the HTTP notification when a trigger is activated.
URL – Specify the URL to send HTTP requests, the URL is normally written as
follows:
http://ip_address/ notification.cgi?parameter
ip_address – type the IP address or host name of the host to which you want to
connect.
Parameter – type the notification parameter if necessary.
Example
URL - http://192.168.1.1/xxxx.cgi
Message - name1=value1&name2=vlaue2
Result - http://192.168.1.1/xxxx.cgi? name1=value1&name2=vlaue2
Ex:
https://192.168.1.1/notification.cgi?event=MD&camera=FB-100A
Message - Enter the message notification that informs you when a trigger is
activated.
47