SCIFIT STEP ONE Service Manual page 76

ELECTRICAL PARTS REMOVAL/REPLACEMENT
conTroLLEr BoArD W/ ADApTEr BrAckET rEmovAL
Tools Required: * Phillips screwdriver
Step 1:
Disconnect the following cables from the
controller board.
1. 3-pin brake cable
2. 2-pin brake cable
3. C ommunication cable
4. Battery cable
5. Power entry cable
Step 2:
Use a phillips screwdriver to remove the
four #6-32 x 1/2" screws (#1128804) and
four #6 external tooth washers (#33733)
that mount the pc board to the bracket.
Step 3:
Remove the controller board (#A5361).
SCIFIT Scientific Solutions For Fitness
SPECIFICATIONS
SPECIFICATIONS
73
SCIFIT Scientific Solutions For Fitness SCIFIT