SCIFIT STEP ONE Service Manual page 12

MEChANICAL REMOVAL/REPLACEMENT
Tools Required: * 3/16 T-Handle Allen Hex * Silicon Spray *Small dead blow hammer * Loctite 271
Step 1:
Position the clamp sleeve with the lipped
edge facing the molded handle, then slide
it onto the handlebar tube.
Step 2:
Align the tabs of the inner tube end plug
and insert it into the end of the tube,
making sure the tabs pop up through the
open holes.
SCIFIT Scientific Solutions For Fitness
SPECIFICATIONS
SPECIFICATIONS
LEFT hAnDLEBAr rEpLAcEmEnT
LIPPED EDGE
FACING HANDLE
ALIGN TABS WITH
HOLES ON THE TUBE
9
SCIFIT Scientific Solutions For Fitness SCIFIT