SCIFIT STEP ONE Service Manual page 59

MEChANICAL PARTS REMOVAL/REPLACEMENT
Step 2:
Lift the left pedal to relieve the tension on
the return spring.
Step 3:
While holding the pedal up remove the
pedal belt (#A5164) from the clutch pulley,
then gently let the pedal down to a resting
position.
Step 4:
Carefully walk the drive belt (#P5166)
off the large pulley turning in a
counterclockwise direction.
ATTENTION
Pinching points may occur when removing
the belt, please use caution.
SCIFIT Scientific Solutions For Fitness
SPECIFICATIONS
Spring tension
will be less
56
SCIFIT
Belt
Scientific Solutions For Fitness
Lift left
pedal upward
SCIFIT