SCIFIT STEP ONE Service Manual page 41

SPECIFICATIONS
MEChANICAL PARTS REMOVAL/REPLACEMENT
Unhook belt loop
from here
Step 4:
Unhook the belt loop from the end of the
belt tension spring.
Step 5:
3/16 Allen hex
There are two screws and nuts that secure
1/2 Wrench
the belt clamp (#A5130) to the belt. Use
a 3/16' allen hex on the flat head screws
(#10537-08101) and a 1/2" wrench on the
nuts (#10537-08103) to LOOSEN, BUT
DO NOT REMOVE, so the belt may be
removed.
Step 6:
Pull the belt (#A5164) out away from the
belt roller (#A1393).
38
SCIFIT Scientific Solutions For Fitness SCIFIT Scientific Solutions For Fitness SCIFIT