SCIFIT STEP ONE Service Manual page 55

MEChANICAL PARTS REMOVAL/REPLACEMENT
Step 3:
While holding the pedal up remove the
pedal belt (#A5164) from the clutch pulley,
then gently let the pedal down to a resting
position.
Step 4:
Carefully walk the drive belt (#P5166)
off the large pulley turning in a
counterclockwise direction.
ATTENTION
Pinching points may occur when removing
the belt, please use caution.
Step 5:
Use a 3mm Allen hex to remove the
four M5 x 18mm flat head socket screws
(#0141378) .
SCIFIT Scientific Solutions For Fitness
SPECIFICATIONS
52
SCIFIT
Belt
Scientific Solutions For Fitness
3mm Allen
hex
SCIFIT