SCIFIT STEP ONE Service Manual page 15

MEChANICAL PARTS REMOVAL/REPLACEMENT
Step 9:
Tighten the thumb nut clockwise, then
clamp the handlebar. The handlebar should
not move, if it does then continue to
unclamp the handle and turn the thumb,
then reclamp until the handlebar does not
move.
Follow the steps in the "Left handlebar Replacement" section for the right handlebar (#A5170).
LEFT AngLE InDIcATor cLAmp rEmovAL
Tools Required: * Angle Clamp Separation Tool
Step 1:
Use the tools and follow the steps 1 thru
5 of the "Left Handle Removal" section
(pages 5 thru 7).
Step 2:
Using a separation tool, place the tool
in between the angle clamp's (#A5135)
opening and separate, so the alignment
tabs of the clamp are dislodged from the
tube hole opening.
SCIFIT Scientific Solutions For Fitness
SPECIFICATIONS
SPECIFICATIONS
rIghT hAnDLEBAr rEpLAcEmEnT
SPECIFICATIONS
12
SCIFIT Scientific Solutions For Fitness
ALIGNMENT TABS
SCIFIT