SCIFIT STEP ONE Service Manual page 60

MEChANICAL PARTS REMOVAL/REPLACEMENT
Step 5:
Disconnect the 3-pin brake cable from the
side of the brake.
ATTENTION
DO NOT PULL THE CABLE. Press the
release tab to disconnect the cable from
the brake, otherwise damage to the cable
housing may occur.
Step 6:
Disconnect the 2-pin brake cable from the
coil cable located at the front of the brake .
Step 7:
Use a 7/16 socket to remove the four
1/4"-20 nylock nuts (#1137018) and four
M6 flat washers (#1140355) .
SCIFIT Scientific Solutions For Fitness
SPECIFICATIONS
57
SCIFIT
7/16 Socket
Scientific Solutions For Fitness SCIFIT