SCIFIT STEP ONE Service Manual page 38

MEChANICAL PARTS REMOVAL/REPLACEMENT
Follow the steps in the "Left Assembly link Removal" section, but for the right assembly link
#A5352.
LEFT ASSEmBLy LInk rEpLAcEmEnT
Tools Required: *Right Angle Phillips Screwdriver *1/4" Allen Hex * 5/8" Socket * Ratchet
*Phillips screwdriver *Torque Wrench that can be set at 720 in/lbs
Step 1:
Align the bottom end of the assembly link
and the pivot link with the bottom holes of
the outer handle and loosely secure them
with t he ha rdware pr eviously r emoved.
Note: Verify the washers are placed in
the correct location.
Step 2:
Place a small amount of Loctite 271 on
the threads of the screw, then align the top
end of the assembly link with the left pedal
link and loosely reattach the flat head
screw and jam nut previously removed.
SCIFIT Scientific Solutions For Fitness
SPECIFICATIONS
SPECIFICATIONS
rIghT ASSEmBLy LInk rEmovAL
SPECIFICATIONS
Outside the
pivot link
Between the
pivot link and
lower outer
handle assembly
Flat head Screw
35
SCIFIT Scientific Solutions For Fitness
Assembly
link
Jam nut
SCIFIT