Removing The Cpu - NEC Versa M540/PB EasYnote R7 Disassembly Manual

Removing the CPU

To remove the CPU, first remove the battery (see
following steps:
1. Remove the screw retaining the CPU Cover as shown in Fig. 12
2. Release all screws on the heat sink, disconnect the Fan connector and carefully remove
the heat sink as shown in Fig. 13
NEC Versa M540/PB EasyNote R7 Disassembly Manual
Removing the
CPU Cover
Fig. 12
Removing the heat sink
Fig. 13
Battery), then perform the
M2x3.5 Black
A = M2x3.5 Black
B = M2x11 Silver
Page 10