Cpu Board, Modem Board; Removing The Cpu Board - NEC VERSA 6000 Series Service Manual

4-16 Field Service Guidelines
4. To remove the buzzer, disconnect the buzzer cable from P13 on the I/O board and
remove the buzzer.

CPU Board, Modem Board

Remove the CPU board and modem board as follows.
Remove the following as previously described:
1.
LCD
top cover
keyboard
LCD status bar
VersaGlide
metal keyboard support.
2. Disconnect the bridge battery, CMOS battery and buzzer from the I/O board.
3. Remove the two screws that secure the CPU board to the base unit.
Gently lift the CPU board out of connectors P2 and P7 on the I/O board.
4.
Figure 4-13 Removing the CPU Board