Port Rate Setting - Planet WGSW-28040 User Manual

The page includes the following fields:
Object
• Information Name
•
Information Value

4.3.8.2 Port Rate Setting

This page provides to configuration port rate parameter. The Bandwidth Control Port Rate screen in
4-3-18 appears.
Buttons
: Click to apply changes.
The page includes the following fields:
Object
• Port
• Type
• State
•
Rate (Kbit/sec)
User's Manual of WGSW-28040 / 28040P / 28040P4
Figure 4-3-16 Preamble Status page screenshot
Description
Display the current information name.
Display the current information value.
Figure 4-3-17 Port Rate Settings page screenshot
Description
Select port number for this drop down list.
Allow ingress or egress type for port rate.
Ingress: traffic control for incoming.
Egress: traffic control for outgoing.
Enable or disable the port rate policer. The default value is "Disabled".
Configure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1048544.
82
Figure 4-3-17 & Figure