The page includes the following fields:
Object
• Trunk
• Backup Port
• Priority
4.4.3 LACP Configuration
This page is used to configure the LACP Configruation. The LACP Configuration screen in
The page includes the following fields:
Object
•
LACP Enable
•
System Priority
Buttons
: Click to apply changes.
User's Manual of WGSW-28040 / 28040P / 28040P4
Description
Select a static trunk group by pull down the drop-down menu bar.
Select backup port number for specified trunk group for backup link.
With static trunk group, the backup ports are standby/redundant ports and can
be aggregated if working ports fail.
Set backup port priority.
The allowed value is from 0 to 255.
Figure 4-4-5 LACP Setting page screenshot
Description
Enable or disable the LACP function.
The default value is "Disabled".
A value which is used to identify the active LACP. The Managed Switch with the
lowest value has the highest priority and is selected as the active LACP peer of
the trunk group.
89
Figure 4-4-5 & Figure 4-4-6
appears.