Snmp Host; Storm Control Command; Storm Control; Bandwidth Control Command - Planet WGSW-28040 User Manual

SNMP Host

Description:
Set trap receiver IP address
Syntax:
snmp host <A.B.C.D> <name>
Parameters:
A.B.C.D : IP Address format is A.B.C.D where (A/B/C/D = 0 ~ 254)
name : Community name (length 1~16)
Example:
To set trap receiver IP address:
WGSW-28040(config)# snmp host 192.168.0.99 public

6.3.23 Storm Control Command

Storm Control

Description:
Set storm control configuration
Syntax:
storm-control port <port_list> <broadcast|multicast|unknown-unicast|unknown-multicast>
Parameters:
Port_list
broadcast
multicast
unknown-unicast :Unknown-unicast storm control
unknown-multicast :Unknown-multicast storm control
Example:
To set storm control configuration:
WGSW-28040(config)# storm-control port 1 unknown-multicast 100

6.3.24 Bandwidth Control Command

Port Bandwidth Control

Description:
Set port bandwidth control configuration
: Port list or 'all'
:Broadcast storm control
:Multicast storm control
User's Manual of WGSW-28040 / 28040P / 28040P4
288