4.5.10 VLAN setting example:
- Separate VLAN
- 802.1Q VLAN Trunk
- Port Isolate (Protected Port)
4.5.10.1 Two separate 802.1Q VLAN
The diagram shows how the Managed Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group 2 and
VLAN Group 3 are separated VLAN. Each VLAN isolate network traffic so only members of the VLAN receive traffic from the
same VLAN members. The screen in
Switches.
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
Figure 4-5-20
appears and
Figure 4-5-20 two separate VLAN diagram
VID
Untagged Members
1
Port-7~Port-24
2
Port-1,Port-2
3
Port-4,Port-5
Table 4-5-2 VLAN and Port Configuration
111
User's Manual of WGSW-28040 / 28040P / 28040P4
Table 4-5-2
describes the port configuration of the Managed
Tagged Members
N/A
Port-3
Port-6