The page includes the following fields:
Object
• Server Index
• Server IP
• Server Port
• Severity
Buttons
: Click to apply changes.
The page includes the following fields:
Object
• Status
• Server Info
• Severity
• Action
Description
Select remote syslog server number for this drop down list.
Provide the remote syslog IP address of this switch.
Default Port no.: 514
Provide the port nimber of remote syslog server.
The severity of the local log entry. The following severity types are supported:
emerg: Emergency level of the system unsable for local log.
alert: Alert level of the immediate action needed for local log.
crit: Critical level of the critical conditions for local log.
error: Error level of the error conditions for local log.
warning: Warning level of the warning conditions for local log.
notice: Notice level of the normal but significant conditions for local log.
info: Informational level of the informational messages for local log.
debug: Debug level of the debugging messages for local log.
Figure 4-2-15 Remote Log Setting Status page screenshot
Description
Display the current remote syslog state
Display the current remote syslog server information
Display the current remote syslog severity
Indicates the remote syslog server mode operation. Possible modes are:
Enabled: Enable emote syslog server mode operation.
When enable remote syslog server mode operation, the log and
messages will be recorded to the remote syslog server.
Disabled: Disable remote syslog server mode operation.
User's Manual of WGSW-28040 / 28040P / 28040P4
55