Switch Rear Panel - Planet WGSW-28040 User Manual

■ 10/100/1000Base-T interfaces
LED Color
LNK/ACT Green
PoE In-Use Orange
■ 1000Base-SX/LX SFP interfaces (shared with Port-25 to Port-28)
LED Color
LNK/ACT Green
1000 Green
■ Alert
LED Color
PoE PWR Green
FAN1 Green
FAN2 Green

2.1.3 Switch Rear Panel

The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz. Figure 2-6, Figure 2-7 & Figure 2-8
WGSW-28040 Rear Panel
WGSW-28040P Rear Panel
Lights: To indicate the link through that port is successfully established.
Blink: To indicate that the switch is actively sending or receiving data over that port.
Lights: To indicate the port is providing 48VDC in-line power.
Off: To indicate the connected device is not a PoE Powered Device (PD)
Lights: To indicate the link through that port is successfully established.
Blink: To indicate that the switch is actively sending or receiving data over that port.
Lights: indicate that the port is operating at 1000Mbps.
Off: If LNK/ACT LED light-> indicate that the port is operating at 100Mbps
If LNK/ACT LED Off -> indicate that the port is link down
Lights to indicate that the power supply failure
Lights to indicate that the FAN1 failure
Lights to indicate that the FAN2 failure
shows the rear panel of these Managed Switches
Figure 2-6 Rear panel of WGSW-28040
Figure 2-7 Rear panel of WGSW-28040P
User's Manual of WGSW-28040 / 28040P / 28040P4
Function
Function
Function
26