Igmp Group Table; Igmp Router Setting - Planet WGSW-28040 User Manual

4.7.6 IGMP Group Table

This page provides Multicast Database. The IGMP Group Table screen in
The page includes the following fields:
Object
• VLAN ID
• Group IP Address
•
SIP Addresee
• Member Port
• Type
• Life(Sec)

4.7.7 IGMP Router Setting

Depending on your network connections, IGMP snooping may not always be able to locate the IGMP querier. Therefore, if the
IGMP querier is a known multicast router/ switch connected over the network to an interface (port or trunk) on your Managed
Switch, you can manually configure the interface (and a specified VLAN) to join all the current multicast groups supported by the
attached router. This can ensure that multicast traffic is passed to all the appropriate interfaces within the Managed Switch.
User's Manual of WGSW-28040 / 28040P / 28040P4
Figure 4-7-9 Multicast Database page screenshot
Description
Display the current VID.
Displaymulticast IP address for a specific multicast service.
Display the current source IP address.
Display the current member port.
Member types displayed include Static or Dynamic, depending on selected
options.
Display the current life.
145
Figure 4-7-9 appears.