Sntp Configuration - Planet WGSW-28040 User Manual

4.2.6 SNTP Configuration

Configure SNTP on this page.
SNTP is an acronym for Simple Network Time Protocol, a network protocol for synchronizing the clocks of computer systems.
You can specify SNTP Servers and set GMT Time zone. The SNTP Configuration screen in
appears.
The page includes the following fields:
Object
• Mode
• SNTP Server Address
• SNTP Server Port
• Time (HH:MM:SS)
• Date (YYYY-MM-DD)
• Time Zone (+/- HH:MM)
Buttons
: Click to apply changes.
User's Manual of WGSW-28040 / 28040P / 28040P4
Figure 4-2-10 SNTP Setup page screenshot
Description
Indicates the SNTP mode operation. Possible modes are:
Enabled: Enable SNTP mode operation.
When enable SNTP mode operation, the agent forward and to transfer
SNTP messages between the clients and the server when they are not
on the same subnet domain.
Disabled: Disable SNTP mode operation.
Type the IP address or domain name of the SNTP server.
Type the port number of the SNTP.
Click this option to set time manually.
Click this option to set date manually.
Allow select the time zone according to current location of switch.
51
Figure 4-2-10 & Figure 4-2-11