Vlan Ingress Filter - Planet WGSW-28040 User Manual

4.5.6 VLAN Ingress Filter

This page allow user to configure VLAN ingress filter setting. The Managed switch use ingress filter setting to discard frames
belonging to VLANs that are not associated with the ingress interface. Ingress filtering is enabled per switch by default. The
VLAN Ingress Filter Setting screen in
The page includes the following fields:
Object
• State
Figure 4-5-6 appears.
Figure 4-5-6 VLAN Ingress Filter Setting page screenshot
Description
Enable ingress filtering for a port by checking the box. This parameter affects
VLAN ingress processing. If ingress filtering is enabled and the ingress port is not
a member of the classified VLAN of the frame, the frame is discarded. By default,
ingress filtering is disabled (no checkmark).

Enabled

Disabled
User's Manual of WGSW-28040 / 28040P / 28040P4
100