4.
Assign the VLAN Trunk Port to be the member of each VLAN – which wants to be aggregated. At this sample, add Port-7 to
be VLAN 2 and VLAN 3 member port. The screen in
Figure 4-5-24 VLAN overlap port setting & VLAN 1 – The public area member assign
5.
Specify Port-7 to be the 802.1Q VLAN Trunk port, and the Trunking port must be a Tagged port while egress.
6.
Assign PVID for each port:
Port-1,Port-2 and Port-3 : PVID=2
Port-4,Port-5 and Port-6 : PVID=3
The screen in
Figure 4-5-25
That is, although the VLAN 2 members: Port-1 to Port-3 and VLAN 3 members: Port-4 to Port-6 also belongs to VLAN 1.
But with different PVID settings, packets form VLAN 2 or VLAN 3 is not able to access to the other VLAN.
7.
Repeat Step 1 to 6, setup the VLAN Trunk port at the partner switch, add more VLANs to join the VLAN trunk and assign
the Trunk port to the VLANs.
appears.
Figure 4-5-25 The configuration of VLAN Trunk port
User's Manual of WGSW-28040 / 28040P / 28040P4
Figure 4-5-24
appears.
115