Port Management; Port Configuration - Planet WGSW-28040 User Manual

4.3 Port Management

Use the Port Menu to display or configure the Managed Switch's ports. This section has the following items:


Port Configuration


Port Counters

Port Error Disabled

Port Mirroring

Jumbo Frame

Protected Ports

Bandwidth Control
4.3.1 Port Configuration
This page displays current port configurations and status. Ports can also be configured here. The port settings relate to the
currently selected stack unit, as reflected by the page header. The table has one row for each port on the selected switch in the
stack and a number of columns, which are:
The Port Configuration screen in
The page includes the following fields:
Object
•
Port Select
• Name
• Enabled
• Speed
Configures port configuration settings
Lists Ethernet and RMON port statistics
Disable port error status
Sets the source and target ports for mirroring
Set the jumbo frame on the switch
Configuration protected ports settings
Configures bandwidth control settings
Figure 4-3-1 & Figure 4-3-2
Figure 4-3-1 Port Settings page screenshot
Description
Select port number for this drop down list.
Indicates the per port name.
Indicates the port state operation. Possible state are:
Enabled - Start up the port manually.
Disabled - Shutdown the port manually.
Select any available link speed for the given switch port. Draw the menu bar to
select the mode.
User's Manual of WGSW-28040 / 28040P / 28040P4
appears.
67