4.7.2 IGMP Snooping Setting
This page provides IGMP Snooping related configuration.
Most of the settings are global, whereas the Router Port configuration is related to the currently selected stack unit, as reflected
by the page header. The IGMP Snooping Setting screen in
The page includes the following fields:
Object
• IGMP Snooping
• IGMP Snooping Version
• Fastleave
•
Unknow Multicast Action
•
Query Interval
• Response Time
User's Manual of WGSW-28040 / 28040P / 28040P4
Figure 4-7-5 & Figure 4-7-6
Figure 4-7-5 IGMP Global Setting page screenshot
Description
Enable or disable the IGMP snooping. The default value is "Disabled".
Sets the IGMP Snooping operation version. Possible versions are:
v2: Set IGMP Snooping supported IGMP version 2.
v3-basic: Set IGMP Snooping supported IGMP version 3.
Enable or disable the fastleave. The default value is "Disabled".
Drop or flood unknown multicast traffic.
Sets the frequency at which the switch sends IGMP host-query messages.
Range: 60-600 seconds;
Default: 125
Sets the time between receiving an IGMP Report for an IP multicast address on a
port before the switch sends an IGMP Query out of that port and removes the
entry from its list.
Range: 10-25 seconds;
139
appears.