Planet WGSW-28040 User Manual page 46

The page includes the following fields:
Object
•
Mode
•
IP Address
•
Subnet Mask
•
Gateway
Buttons
: Click to apply changes.
The page includes the following fields:
Object
• DHCP State
• IP Address
• Subnet Mask
• Gateway
User's Manual of WGSW-28040 / 28040P / 28040P4
Description
Indicates the IP address mode operation. Possible modes are:
Static: Enable NTP mode operation.
When enable NTP mode operation, the agent forward and to transfer NTP
messages between the clients and the server when they are not on the
same subnet domain.
DHCP: Enable DHCP client mode operation.
Enable the DHCP client by checking this box. If DHCP fails and the
configured IP address is zero, DHCP will retry. If DHCP fails and the
configured IP address is non-zero, DHCP will stop and the configured IP
settings will be used. The DHCP client will announce the configured
System Name as hostname to provide DNS lookup.
Provide the IP address of this switch in dotted decimal notation.
Provide the subnet mask of this switch dotted decimal notation.
Provide the IP address of the router in dotted decimal notation.
Figure 4-2-4 IP Information page screenshot
Description
Display the current DHCP state.
Display the current IP address.
Display the current subnet mask.
Display the current gateway.
46