Ip Command; Dhcp; Ip Address; Ip Default Gateway - Planet WGSW-28040 User Manual

6.3.29 IP Command

DHCP

Description:
Enable DHCP client
Syntax:
ip dhcp
Example:
To enable DHCP client:
WGSW-28040(config)# ip dhcp

IP Address

Description:
Set IP address
Syntax:
ip address <ip_address> <subnet_mask>
Parameters:
Ip_address : IP Address format is A.B.C.D where (A/B/C/D = 0 ~ 254)
Subnet_mask : subnet mask format is A.B.C.D where (A/B/C/D = 0 ~ 255)
Example:
To set IP address:
WGSW-28040(config)# ip address 192.168.0.20 255.255.255.0

IP Default Gateway

Description:
Set IP default gateway
Syntax:
ip default-gateway <A.B.C.D>
Parameters:
A.B.C.D : IP default gateway format is A.B.C.D where (A/B/C/D = 0 ~ 254)
Example:
To set IP default-gateway:
WGSW-28040(config)# ip default-gateway 192.168.0.254
User's Manual of WGSW-28040 / 28040P / 28040P4
299