Paging; Making Pages; Enabling Paging - Inter-Tel Associate Display Phone User Manual

P
AGING
The Paging feature allows you to make an announcement through phone speakers or
external speakers (if your system is equipped with external paging equipment). To
prevent announcements from transmitting through every phone in the system, this fea-
ture uses page zones. Each zone contains a different combination of extensions and
external paging equipment, and is programmed by your System Administrator. Ask
your trainer or System Administrator how the zones are programmed, and list them
here for your convenience:
NOTE:
Some phones have a PAGE ZONE key, which is programmed to page a spe-
cific zone. If you do not know what page zone is programmed for this key, ask your Sys-
tem Administrator.

Making Pages

To make pages:
EITHER, Lift the handset, dial
1.
OR, Press
Dial the desired zone number (0-9).
2.
After the tone, make your announcement and hang up.
3.

Enabling Paging

You can enable or disable page receiving for your phone by using the Page Remove/
Replace feature code. If your phone is assigned to more than one page zone, all zones
are removed or replaced at once (you cannot turn off individual zones).
To turn paging on and off for your phone:
Dial
3 2
Eclipse Associate Display and Basic Digital Phone User Guide
0 _______________________
1 _______________________
2 _______________________
3 _______________________
4 _______________________
7
, if your phone has this key.
PAGE ZONE
.
5
5 _______________________
6 _______________________
7 _______________________
8 _______________________
9 _______________________
, and dial the desired zone number (0-9).
51