2.6
System Security
The Setup program has a number of security features to prevent
unauthorized access to the system and its data.
Enter the Setup program and select System Security to display the
following screen.
Disk Drive Control
Diskette Drive.................. [
Hard Disk Drive................. [
System Boot Drive............... [Drive A then C]
Boot from CD-ROM................ [Disabled]
Onboard Communication Ports
Serial Port 1 Base Address...... [
Serial Port 2 Base Address...... [
Parallel Port Base Address...... [378 (IRQ 7]
Operation Mode............... [Standard Parallel Port (SPP)] Mode
*ECP DMA Channel ......... [-]
Onboard PS/2 Mouse (IRQ12) ... [Enabled ]
Setup Password .................... [
Power On Password ................. [
↑↓ = Move Highlight Bar,
PgDn/PgUp = Move Screen,
2.6.1
Disk Drive Control
The disk drive control features allow you to enable or disable the
read/write functions of a disk drive. These features can also control
the diskette drive or the hard disk drive boot function to prevent
loading operating systems or other programs from a certain drive
while the other drives are operational.
Table 2-1 lists the drive control settings and their corresponding
functions.
2-22
System Security
Normal
Normal
3F8h
]
2F8h
]
None
]
None
]
→ ← = Change Setting
F1 = Help,
Esc
Page 1/1
]
]
=
Exit
User's Guide