Chapter 6: Configuring The Cisco Vc 220 Network Camera Software - Cisco VC 220 Administration Manual

Dome wdr day/night poe network camera
Hide thumbs Also See for VC 220:
Table of Contents

Advertisement

Configuring the Cisco VC 220 Network
Camera Software
NOTE
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
This section describes the functions of the camera's configuration utility. For
information on how to use your camera for advanced monitoring, see the
Small Business Video Monitoring System Administration
Microsoft Internet Explorer (IE) is the official supported browser for the
Cisco VC 220 network camera. Other browsers provide limited functionality.
The inactivity time-out for the camera's configuration utility is 10 minutes.
This chapter contains the following sections:
Network Setting > IP Setting, page 41
Network Setting > TCP/UDP Port Settings, page 44
Network Setting > Multicast, page 47
Network Setting > HTTPS, page 48
Network Setting > IP Filter, page 49
Network Setting > DDNS, page 51
Network Setting > QoS, page 52
Network Setting > SNMP, page 53
Network Setting > 802.1X, page 54
Network Setting > DHCP Auto Configuration, on page 56
Camera Control > Video Settings, page 57
Camera Control > Audio Settings, page 60
Camera Control > I/O Ports, page 62
Applications > Servers, page 63
6
Cisco
Guide.
39

Advertisement

Table of Contents
loading

Table of Contents