Configuring the Cisco VC 220 Network Camera Software
Applications > Events
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
Action
To display servers as action output, be sure to configure the server settings in
Applications > Servers, page
server entries appear under the Action section.
For each event, you can configure the trigger input and select a server as its action
output. The digital output is turned on for a set amount of seconds when an event
is triggered. The default duration is 1 second.
When completed, click OK to take effect. The new media name appears in the
Events drop-down list on the Application > Events page. To remove an event
setting from the list, select an event name from the drop-down list and then click
Delete.
63. After you configure multiple servers, additional
6
72