Installing the Cisco VC 220 Network Camera Software
Where to Go Next
NOTE
Where to Go Next
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
c. Click OK.
For security purposes, it is recommended that you reset your password. See the
Administration > Users, page 75
Strength, page 78
for information on minimum password security settings that
are enabled on the camera by default.
If it is not your first time accessing the web-based configuration utility, or if you
changed the password using the Setup Wizard, remember to use the username
and password that you set.
•
Using the Web-Based Configuration Utility, page 31
the features found in the configuration utility and the View Video page.
•
Configuring the Cisco VC 220 Network Camera Software, page 39
complete descriptions of the camera's configuration utility.
•
Finalizing the Cisco VC 220 Hardware Setup, page 87
adjusting the lens and replacing the cover.
page. See also
Administration > Password
4
for information about
for
for instructions on
30