Cisco VC 220 Administration Manual page 14

Getting to Know the Cisco VC 220 Network Camera
Parts of the Camera
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
Status LED Indicates the following status:
LED Off—The power is off or the LED status is turned off.
Flashing green in one second intervals—The camera and
network are functioning.
Steady orange—The camera can't detect a networking
signal; thus the camera is not functioning. For example, the
Ethernet cable is not attached.
Flashing orange—The PIR sensor noted movement.
Flashing green rapidly—The firmware is being upgraded.
Flashing orange rapidly—The camera's default settings are
being restored.
Alternating flashing green and orange—Video has been
lost.
12 Infrared (IR) Enables operation in complete darkness. The ring of IR LEDs
LEDs are built-in with a working range of 15 m (50 feet).
Light Sensor Detects the amount of ambient light and switches the camera
from day to night. If light is too low, the light sensor triggers
the IR LEDs to turn on.
2
14