Cisco VC 220 Administration Manual page 93

Dome wdr day/night poe network camera

Hide thumbs Also See for VC 220:

Table of Contents

Sample Configurations for the Cisco VC 220 Network Camera

Configuring Motion Detection with Email Notification

STEP 3

NOTE

VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide

d. Enter the appropriate email addresses.

e. Click Test to test your settings.

Click Save.

Configure motion detection.

Motion Detection cannot be configured using the Firefox browser. Internet Explorer

must be used to configure motion detection.

a. Access the setup options for your Cisco VC 220 network camera by clicking

Setup.

b. Go to the Applications > Motion Detection page.

c. Check Enable Motion Detection. You can now set the areas to be monitored,

as well as the sensitivity.

Table of Contents