Table of Contents
Advertisement
Chapter 2
Camera Installation
Do not disassemble the IP Camera.
•
Do not insert sharp or tiny objects into the
•
IP Camera.
Warning
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
The power supply must be placed indoors. Statement 331
Note
Warning
This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source
or an IEC60950 compliant limited power source. Statement 353
Inline power circuits provide current through the communication cable. Use the Cisco provided cable or
Caution
a minimum 24AWG communication cable.
The power adapter that you use with the IP camera must provide power that is within +/–10% of the
Note
required power.
OL-28689-01
If you use the IP camera outdoors, place the camera and the power supply in a suitable NEMA
enclosure.
Do not drop the IP Camera.
•
Cisco Video Surveillance 3530 IP Camera Installation Guide
Warnings Before Installation
2-3
Advertisement
Table of Contents
