Configuring the Cisco VC 220 Network Camera Software
Applications > Events
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
•
Priority—Select the relative importance of this event. Choose from High,
Normal, and Low.
•
Wait at least___ seconds before detecting next event—The delay to
check for the next event. This field is used with motion detection and digital
input triggers. The default is 10 seconds.
Trigger
•
Video motion detection—Select the windows that need to be monitored.
Motion Detection must be set first.
•
Periodically—Trigger the event in specified intervals. The unit of trigger
interval is in minutes. The default is 1 minute.
•
Digital input—Allows you to monitor digital input.
•
PIR (Passive Infrared)—An additional input trigger that is based on thermal
detection. PIR is good for locations where motion detection can be difficult
to implement due to changing or moving backgrounds. The PIR sensor is
located on the front of the camera.
•
System boot—Trigger the event when the system boots up. Useful if the
trigger is caused by a loss of power or tampering.
Event Schedule
•
Event Schedule—Select the specific days that you would like recording to
occur.
•
Time—Select when to record. Choices are Always, or a specific time
period in a 24-hour time format.
6
71