Set Mode; Set Mode Items - Icom IC-R2500 Instruction Manual

9

SET MODE

■ Set mode
• Set mode operation
q Push the desired band's [MAIN] to select the main band.
w Push [SET•SKIP] to enter set mode.
e Push [SET•SKIP] or [ATT•PRIO] to select the desired
item.

■ Set mode items

• Key-touch beep
• Squelch delay
SSB/CW
mode only
3
• IF shift
*
• IF filter
• AFC function 2
*
FM mode only
39
• Beep output level
4
• NR function • ANF function
*
When the UT-106 is installed
• Weather alert 1
*
USA/CANADA
versions only
• Bank link function ‡
• Scan skip area † • Program skip
VFO mode only
r Rotate the main band's [DIAL] to select the condition or
value.
t Push any switch for main band or common switch other
than [SET•SKIP] or [ATT•PRIO] to exit set mode.
• Set mode items
• Auto power OFF • Display dimmer
1
* Available for USA/CANADA versions only.
4
*
2
* Appears while in FM mode only.
3
* Appears while in SSB/CW mode only.
4
* Appears when the UT-106 is selected.
: Push
: Push
†
Appears when accessing set mode from VFO mode only.
‡
Appears when accessing set mode from memory mode only.
• Memory name ‡
Memory mode
only
† • Scan resume timer • VSC function
• Display color
• Display contrast
• Duplex direction
SET
SKIP
• Offset frequency
ATT
PRIO
• TSQL frequency
• DTCS polarity • DTCS code