Set Mode; General; Set Mode Items - Icom IC-R2500 Instruction Manual

10

SET MODE

■ General

• Set mode operation
q Push the desired band's [MAIN] to select the main band.
w Push [SET•SKIP] to enter set mode.
e Push [SET•SKIP] or [ATT•PRIO] to select the desired
item.

■ Set mode items

• Key-touch beep
• Rx TGID indication
• Unit ID setting
These items appear
when the UT-122 is
installed, and Optional
items setting is ON.
49
• Beep output level • Auto power OFF
• Rx Unit ID indication
• Auto Rx ID display
• TGID setting
r Rotate the main band's [DIAL] to select the condition or
value.
t Push any key for main band or or any of the shared keys
below the display to exit set mode.
• Display dimmer
SET
: Push
SKIP
ATT
: Push
PRIO
1
* Available for USA/CANADA versions only.
2
* Appears while in FM mode only.
3
* Appears while in SSB/CW mode only.
4
* Appears when the UT-106 is selected.
5
* Appears when the UT-118 or UT-122 is installed.
†
Appears when accessing set mode from VFO mode only.
‡
Appears when accessing set mode from memory mode only.
• NAC code setting • P25 unit power setting
• Display color
• Display contrast
Set mode items
for DV mode
are described
on ((page 51)).