AMX MAX-CSD 10 Operation And Reference Manual page 75

FIG. 44 Button Properties tab
A
FIG. 45 Video Fill - Button Properties setting
FIG. 46 Example of the current display
MAX-CSE/MAX-CSD10 Operation/Reference Guide
Our example uses: udp://192.199.99.99:5000
Refer to Configuring the MAX-CSE for communication section on page 65. The MAX-CSE is
available from either the front LCD (FIG. 46) or from the IP Settings page of the UI.
When using an RTP Transport Protocol, determine whether you are using an MPEG-2 or
MPEG-4 stream and enter the following into the Streaming Source field:
rtpmpeg#://IP Address of MAX-CSE:Target Video Port
Although our example doesn't use RTP, you could enter the following:
for MPEG-2 rtpmpeg2://192.199.99.99:5000
for MPEG-4 rtpmpeg4://192.199.99.99:5000
Displaying Stream Content
Button Draw and Selection
tools
Currently active button
Button Properties Control window
(displays information for the
currently active/selected button)
B
69