AMX MAX-CSD 10 Operation And Reference Manual page 61

5. Within the Master IP/URL field, enter the IP Address or URL used by the target Master. This is the
same IP Address used by NetLinx Studio to communicate with the Master.
6. Unless otherwise necessary, do not alter the default value entered within the Master Port field. This
field allows you to enter the port number used by the NetLinx Master.
7. Click the Apply button to complete the configuration process and save the parameters to the MAX
unit.
8. Confirm that the target Master is not configured for require encryption and communicate via a
secured ICSP connection. It is not necessary to remove all security from a target Master to establish
a connection.
9. Confirm the MAX unit is properly communicating with the target Master by using NetLinx Studio
to confirm the presence of the new device within the Master's System listing (FIG. 35).
FIG. 35 Studio Online Tree tab showing the communicating MAX unit
MAX-CSE/MAX-CSD10 Operation/Reference Guide
You must use a value which is not currently being used by another device currently
communicating with the target Master.
The Default value is 32001.
Within Studio, connect to the target Master, click on the Online Tree tab to review what
device values are already being used (FIG. 35).
The Default value is 1319.
Use a second instance of your browser to navigate to the UI pages of the target Master (via the
device's IP Address).
After successfully logging into the Master, locate the Security section of the left Navigation
frame and click on the System Level link to open the System Security Settings page.
Uncheck the ICSP Connectivity and Require Encryption options (see FIG. 19 on page 33).
This allows an unencrypted device using ICSP to communicate with the target NetLinx
Master.
Click the on-screen Update button to save this new configuration to the target Master.
This listing of devices recognized by the target Master can be found by refreshing the System
listing within the Online Tree tab.
Refer to the Communicating with the Target Master via an IP section on page 52 for detailed
procedures.
Configuring Communication
Communicating MAX unit
(showing current installed firmware version)
55