Table of Contents
Advertisement
MAX-CSD10 Web Interface
Administration Page Features (Cont.)
Feature
Stream Status frame:
Play/Stop
Status
Refresh
Logoff
Active Page frame:
40
Description
Located on the upper-right side of the browser window, this static
frame allows a user to not only Start and Stop an encoding
stream, but also view whether the MAX-CSD10 is detecting an
A/V signal.
• Since this frame is static, it appears on-screen no matter what
page is currently active. This frame can be very useful for a
remote administrator when trying to troubleshooting most
streaming issues.
The button at the top of the window reflects the condition of the
outgoing media content:
• Play begins to sync-up the media signals and then stream them
out from the device.
- This play state is shown as active when both the Stop button
is displayed and the green
displayed within the Status field.
- No changes can be made to both the communication
parameters and stream profiles while the unit is in this mode.
• Stop halts the outgoing media stream from the device.
- This stop state is shown as active when both the Play button
is displayed and the blue
Idle
the Status field.
- Changes can be made to both the communication
parameters and stream profiles while the unit is in this mode.
• Indicates the status of the outgoing stream.
•
Streaming
indicates that the Play button has been activated
and the process of receiving a media stream has begun.
Streaming does not require that content be provided to the unit,
it is only the conversion process which has been initiated. This
is why it is important to make sure that the unit is also detecting
an incoming A/V feed.
•
Idle
indicates that the Stop button has been activated and the
stream process has been halted.
This button causes the unit to re-verify the condition/state of the
stream Status.
This button logs off the Decoder Manager. The user will then
have to log back in with the correct userid and password to
access the Decoder Manager.
Located on the right side of the browser window, this dynamic
frame displays the pages corresponding to the currently selected
option from within the Navigation frame. The top of these pages
also provide the user with some common application buttons
such as Apply and Refresh.
• Since this frame is dynamically populated, its contents will
depend on which Navigation link was currently selected.
MAX-CSE/MAX-CSD10 Operation/Reference Guide
Streaming
message is
message is displayed within
Advertisement
Table of Contents
