Table of Contents
Advertisement
Configuration and Firmware Update
FIG. 39
Send to NetLinx Device dialog (showing MAX unit's firmware updated via IP)
11. Click the Reboot Device checkbox to reboot the MAX unit after the firmware update process is
complete.
12. Click Send to begin the transfer. The file transfer progress is indicated on the bottom-right of the
dialog (FIG. 39).
Download of the last Kit file component can take a few minutes to complete. DO NOT
terminate this upload process until all components have completely been installed
and the device reboots. During this process, the LCD will show FW LOADING.
13. Click Close once the download process is complete.
14. Right-click the System number and select Refresh System. This establishes a new connection to the
System and populates the list with the current devices (and their firmware versions) on your system.
If the connection fails to establish, a Connection Failed dialog appears.
Try selecting a different IP Address if communication fails.
Press the Retry button to reconnect using the same communication parameters.
Press the Change button to alter your communication parameters and repeat
steps 2 thru 12.
62
Selected MAX firmware file
Description field for selected Kit file
Device and System Number
must match the Device and System
values listed in the Workspace window
MAX-CSE/MAX-CSD10 Operation/Reference Guide
Firmware download
status
Advertisement
Table of Contents
