Message Queuing And Message Priority - ASCOM i75 VoWiFi User Manual

User Manual
Ascom i75 VoWiFi Handset
Interactive message
Figure 15. Example of an interactive message
An interactive message has one ore more options. A very simple interactive message can
look like the one in
application, see

12.1.3 Message Queuing and Message Priority

If several messages are received during a short period of time it is possible to specify at
which rate the messages will be shown on the display. If a minimum time for messages to
be displayed is set, each message will be shown without being interrupted by another
message, except if the new message is of higher priority. Messages that are not shown yet
are placed in a queue and the priority and time of reception determine the position in the
queue. There are 9 levels of the priority. 1 is highest priority and 9 is lowest priority. If
several of the messages have the same priority the message that was received first is
shown first. If no minimum time is set (the parameter is set to 0) the priority order is
disabled. Refer to the Configuration Manual i75 VoWiFi Handset. The total number of
messages in the queue and the message list can not exceed the total number of characters
stored, see
If a new message with a higher priority is received while another message is read the new
message will replace the old message in the display. The old message will be placed in the
2008-11-10/ Ver. D
Figure 29.
Confernce this evening!
Will you be there?
"Fred Smith" <Fred.Smith
@company.com
2007-04-20 5:44pm
Options
Reply
Select
figure 15. The options depends on the configuration in the client
12.5 Interactive Messaging
12.1 Message List on page 28.
Delete Close
Options
Back
on page 33.
TD 92319GB
30