Edit A Hot Key; Select Language - ASCOM i75 VoWiFi User Manual

User Manual
Ascom i75 VoWiFi Handset
8 Choose the desired function for the Soft key. See table below.
Soft key/Hot key functions:
Data send:
Data with prefix:
Phone call:
Short-cut:
Send message:
Change profile:
Presence
c
PTT
Not used:
The name of the selected function is shown. The handset will automatically return
to the soft key.

15.5.9 Edit a Hot key

1 Mark the Settings icon and press "Select".
2 Mark "Hot key" and press "Select".
3 Mark the one you want to edit (0, 1, 2,......9) and press "Change".
4 Name: is marked; press "Edit".
5 Enter a name of maximum sixteen characters. Press "Ok". Changes saved is shown
and the handset automatically returns to the hot key.
6 Mark "Function". Press "Change" to enter functions.
7 Choose the function you want the Hot key to have. The functions for a Hot key are
the same as for a Soft key, see table under
Note: This function can be disabled by your system administrator.

15.5.10 Select Language

1 Mark the Settings icon and press "Select".
2 Mark "General" and press "Select".
3 Mark "Language" and press "Select".
2008-11-10/ Ver. D
Press "Select". Enter data if you want it to be predefined, or
leave it out if you want to enter data after pressing the Soft
key, press "Save".
Press "Select". Enter prefix and press "Save".
Press "Select". Enter phone number and press "Save".
Alternatively, press the Phonebook Soft key and choose a
contact from the Local phonebook and then press "Save".
Tone sender on will be indicated with a "T" in the number, and
off with "-". A pause can be added by making a long press on
the *-key. The pause is indicated with a "P" in the number.
Press "Select". Assign the short-cut; Local phonebook, Central
phonebook, Message list, Absent, No-movement, Man-down,
Edit alarm data, Menu, Call list, Services, RSSI, Network
statistics, Call diversions
Press "Select". When Message address is shown you can leave
it blank, or you can predefine a destination address; press
"Select".
Press "Select". Mark the desired profile and press "Select".
b
Press "Select".
If needed a specific PTT group can be assigned. Press "Select".
Press "Select". Not used will be indicated in the Soft key list.
a. Only applicable with the H.323 protocol
b.Requires that the handset has logged into a Presence management System.
c.Requires a Multi Point Control Unit (MCU) and that groups have been created in the system.
a
or Presence. Press "Select".
15.5.8 Edit a Soft key on page 47.
TD 92319GB
48