Table of Contents
Advertisement
User Manual
Ascom i75 VoWiFi Handset
9.4.4
Put a Call on Hold/Retrieve the Call
Put a call on hold: press "Options" during the call, mark "Hold: (No.)" and press "Select".
The call is put on hold and the text On hold (No.) is shown in the display.
To retrieve the call press "Options" once again and mark "Retrieve". The call is retrieved
and the text disappears from the display.
9.4.5
Turn the Mute Mode On/Off
A press on the Mute button disconnects/connects the microphone. The text Muted is
shown in the display when the microphone is off during a call.
9.4.6
Increase/Decrease the Speaker Volume
Press the upper part of the Volume button to increase the volume, and press the lower
part of the Volume button to decrease the volume.
9.5
Loudspeaking Function
How to activate the loudspeaking function is dependent of the choice of answering
method. An incoming call can be connected with loudspeaking function active by pressing
the middle Soft key. During a call, a press on the middle Soft key activates the
loudspeaking function. Press the middle Soft key again to turn it off.
You can also activate this function by selecting another answering method, see
Choose the Profile's Answering method
have three choices in the menu:
• Ordinary/Auto. The loudspeaking function is turned on when the middle Soft key is
pressed.
• Loud. A call is connected with the loudspeaking function turned on when
pressed.
• Auto loud. An incoming call is automatically connected after 2 signals with the
loudspeaking function turned on. If the call is answered before two signals have
sounded, the loudspeaking function will not be turned on automatically.
2008-11-10/ Ver. D
on page 52. For the loudspeaking function you
TD 92319GB
15.6.4
is
25
Advertisement
Table of Contents
Need help?
Do you have a question about the i75 VoWiFi and is the answer not in the manual?