Honeywell Bioptic Aux Port Configuration; Datalogic™ Magellan © Aux Port Configuration; Ncr Bioptic Aux Port Configuration - Honeywell Vuquest 3310g User Manual

Honeywell Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for a Honey-
well bioptic scanner auxiliary port configuration. This bar code sets the
baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop
bit.
Note: If you are having unexpected results with this programming code,
scan the Activate Defaults bar code on
programming code above.
Datalogic™ Magellan
Scan the following Plug and Play code to program the scanner for a Data-
logic Magellan auxiliary port configuration. This bar code sets the baud
rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Note: If you are having unexpected results with this programming code,
scan the Activate Defaults bar code on
programming code above.

NCR Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for an NCR
bioptic scanner auxiliary port configuration. The communication should be
set at 9600bps baud rate, 7 data bit data format, even parity and 1 stop bit.
The following prefixes are programmed for each symbology:
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
2 - 6
Honeywell Bioptic Settings
©
Aux Port Configuration
Datalogic Magellan Bioptic Settings
Prefix
A
E0
FF
F
page 1-5
page 1-5
Symbology
Code 39
Interleaved 2 of 5
All other bar
codes
first, then scan the
first, then scan the
Prefix
B1
B2
B3