Presentation Sensitivity; Presentation Centering - Honeywell Vuquest 3310g User Manual

Presentation Sensitivity

Presentation Sensitivity is a numeric range that increases or decreases the
scanner's reaction time to bar code presentation. To set the sensitivity,
scan the Sensitivity bar code, then scan the degree of sensitivity (from 0-
20) from the inside back cover, and Save. 0 is the most sensitive setting,
and 20 is the least sensitive. Default = 1.
Sensitivity

Presentation Centering

Use Presentation Centering to narrow the scanner's field of view when it is
in Presentation Mode to make sure the scanner reads only those bar codes
intended by the user. For instance, if multiple codes are placed closely
together, Presentation Centering will insure that only the desired codes are
read.
Note: To adjust centering when the scanner is hand-held, see
Centering (page 3-19).
If a bar code is not touched by a predefined window, it will not be decoded
or output by the scanner. If Presentation Centering is turned on by scan-
ning Presentation Centering On, the scanner only reads codes that pass
through the centering window you specify using the Top of Presentation
Centering Window, Bottom of Presentation Centering Window, Left,
and Right of Presentation Centering Window bar codes.
3 - 9