User-Specified Reread Delay; 2D Reread Delay - Honeywell Vuquest 3310g User Manual

Use shorter delays in applications where repetitive bar code scanning is
required. Reread Delay only works when in a Presentation Mode (see page 3-
7). Default = Medium.
Short (500 ms)
* Medium (750 ms)
Long (1000 ms)
Extra Long (2000 ms)

User-Specified Reread Delay

If you want to set your own length for the reread delay, scan the bar code below,
then set the delay (from 0-65,535 milliseconds) by scanning digits from the
inside back cover, then scanning Save.
User-Specified Reread Delay

2D Reread Delay

Sometimes 2D bar codes can take longer to read than other bar codes. If you
wish to set a separate Reread Delay for 2D bar codes, scan one of the program-
ming codes that follows. 2D Reread Delay Off indicates that the time set for
Reread Delay is used for both 1D and 2D bar codes. Default = 2D Reread Delay
Off.
* 2D Reread Delay Off
3 - 16