To remove this delay, scan the Interfunction Delay bar code, then set the
number of delays to 0. Scan the Save bar code using the
Chart
inside the back cover of this manual.
Intermessage Delay
An intermessage delay of up to 5000 milliseconds (in 5ms increments)
may be placed between each scan transmission. Scan the Intermessage
Delay bar code below, then scan the number of 5ms delays, and the Save
bar code using the
ual.
1st Scan Transmission
To remove this delay, scan the Intermessage Delay bar code, then set the
number of delays to 0. Scan the Save bar code using the
Chart
inside the back cover of this manual.
Programming Chart
Intermessage Delay
Intermessage Delay
inside the back cover of this man-
2nd Scan Transmission
Programming
Programming
4 - 7